A residential job in Australia has three things a customer and an inspector look at closely: the STC discount on the quote, the single-line diagram, and the tax invoice. This post shows how Solset AI handles each for an Australian workspace, and where your CEC-accredited designer, your structural engineer and your agent still sign off.
1. STCs on the quotation
For an Australian workspace, the quotation can show STCs as a point-of-sale discount. The number of STCs is worked out from the system size, the zone of the installation postcode and the deeming years left in the install year: system kW × zone rating × deeming years, rounded down.
- Example: a 6.6 kW system in Parramatta NSW 2150 (zone 3), installed in 2026, creates 45 STCs. The same system installed in 2027 creates 36, because the deeming years fall each January until the scheme ends in 2030.
- You type the price per STC your trader pays. No price is assumed, and the quotation says the figure is an estimate.
- Zone ratings and deeming years are to confirm against the Clean Energy Regulator before you rely on them.
- Mark modules and inverters as CEC-listed in your catalogue. Solset AI does not fetch the CEC approved-products list.
2. Single-line diagrams on an AS/NZS basis
The Design Studio proposes DC and AC protection and prints the single-line diagram with notes on an AS/NZS 5033 and AS/NZS 4777.1 basis. Every proposal is a starting point for a CEC-accredited designer to confirm and sign; nothing on the drawing is final until they do.
Structures are checked with wind loads by AS/NZS 1170.2: the wind region is picked, or taken from the state for new designs. Every constant is for a structural engineer to confirm.
3. GST tax invoices and the BAS worksheet
- The accepted quotation becomes a Tax Invoice with taxable, GST-free and input-taxed lines and "Total includes GST".
- ABNs for you, your customers and vendors are checked against the ABN check-digit rule, and an invoice of A$1,000 or more without a buyer ABN shows a warning.
- Bank details print with BSB, account number and account name.
- The BAS worksheet (G1, G2, G3, G10, G11, 1A and 1B) is prepared for a quarter or month on the July year, for your agent to check and lodge through the ATO portal.
What Solset AI does not do
- It does not lodge your BAS or create STCs in the REC Registry.
- It does not apply your DNSP's connection rules. You track each connection application with your own project stages.
- It does not certify a design. The diagram, the protection and the structure report are for your designer and engineer to confirm.
Try it on one job
See what is set up at Solset AI for Australia. Plans are priced in US dollars and paid by card; your Australian customers see AUD on every document. Compare the plans, or start a free workspace and quote your next job with it.
See Solset AI for your solar business
Create a free workspace, add one real enquiry and take it to a quotation. No card.
Start free